Wire-wound Rods
The wire and its rod from the wire-wound rods are made of stainless steel，which are corrosion-resistance. A coating（Paint or Ink）is being drawdown by a known thickness wire-rod applicator over a substrate（eg. Black/White Test Chart, Glass or Wood Panel, etc.）onto our Drawdown Board. The motion of the drawdown is done by gripping the 2 edges of the applicator or by using the Holder
These applicators provide an economical way to assure the uniformity of thickness of very thin films.
◆ Bar and wire manufactured of stainless steel
◆ Perfect for very thin films, e. g. foils and paper coating tests
◆ Ideal for flexible materials such as paper, cardboard, test charts, foils, leather, textiles, etc.
◆ Maximum attainable wet film thickness engraved on bar end
◆ Simultaneous drawdown of several samples side by side is possible
Wire-wound Rods
Effective Wire-Wounding Length：200mm
■ Bar Total Length：240mm
■ Theoretical Wet Film Thickness（µm）available：6-8-10-12-15-20-25-30-40-50-60-80-100-120-150-200
■ Bar Diameter：10mm
■ Ordering Information
BGD 212/6—6µm Wire-wound Rod
BGD 212/8—8µm Wire-wound Rod
………………….
BGD 212/150—150µm Wire-wound Rod
BGD 212/200—200µm Wire-wound Rod
BGD 1152—-Holder for Wire-wound Rod
BGD 216—-Wire-wound Rod set 4（includes any 4pcs different size wire bar coaters, a holder and a carrying case）
所有評論僅代表網友意見，與本站立場無關。