LR-B009 Two Box Thermal Shock Chamber
| Product name | Two van hot and cold impact testing machine Use of low temperature and high temperature hot and cold storage tank, in accordance with the cylinder, the hanging basket in turn to high temperature and low temperature box, so as to achieve rapid temperature shock effect, balance (BTC) + special temperature control system design of supply air circulation system, to control SSR P.I.D. way, make the system of heat equal to the amount of heat loss, thus the use of long-term stability. | ||||
| Product model | TSD – 11 – a – 2 p (air-cooled type) Note: air-cooled type need not install cooling towers, water cooled type to install, depends on customer’s requirement. | ||||
| Limit sample | The test equipment prohibited: (1)Which is inflammable, explosive, easy to volatile substances sample test or store | ||||
| Volume, size and weight | |||||
| Nominal content product | 52L | ||||
| Shopping basket size | W50*H32*D32cm | ||||
| Installation dimensions | W132*H187*D155CM | ||||
| weight | About 400㎏ | ||||
| LR-B009 Two Box Thermal Shock Chamber Performance | |||||
| Test environment conditions | Environment temperature is 25 ℃, relative humidity of 85% or less, test under the condition of no sample in the box GB/T 5170.2 1996 temperature testing equipment. | ||||
| High greenhouse | +60℃→+150℃ | ||||
| Time | +60℃→+150℃ ≤25min | ||||
| Temperature range | -55℃～-10℃ | ||||
| Time | +20℃ → -55℃≤60min | ||||
| Test (style) | Test chamber upside for high temperature, lower for the low temperature zone, specimen is placed in the basket, basket turns in the high temperature box and low temperature in experiment | ||||
| Shock temperature range | （+60～+100）℃/（-40～-10）℃ | ||||
| Temperature fluctuation degree | ±0.5℃ | ||||
| The temperature deviation | ±2.0℃ | ||||
| The temperature recovery time | ≤5min | ||||
| Temperature conversion time | ≤10sec | ||||
| Restore conditions | High temperature exposure: + 150 ℃ / min – > low temperature exposure: 30 to 55 ℃ / 30 min Sample maximum weight: 2.5 KG | ||||
| Meet the test standard | GB/T 2423.1 2008 test: A test method at low temperature GB/T 2423.2 2008 test B: high temperature experiment method GB/T2423.22-2002 test N: temperature change test method test Na GJB 150.5 A – 2009 military equipment laboratory test method for part 5: the temperature impact test GJB 360 a – 1996 temperature impact test GJB367.2-2001 military communication equipment general specification temperature impact test IEC 68-2-14 test method for N: temperature changes | ||||
| Structural features | |||||
所有評論僅代表網友意見，與本站立場無關。