LR-B007 Touched Screen Salt Spray Tester(120type)
Use:
This machine has a standardized test method to check corrosion resistence of coated samples. Salt spray test is an accelerated corrosion test that produces a corrosive attack to the coated samples in order to predict its suitability in use as a protective finish. The appearance of corrosion products (oxides) is evaluated after a period of time. Test duration depends on the corrosion resistance of the coating; the more corrosion resistant the coating is, the longer the period in testing without showing signs of corrosion. Different coatings have different behaviour in salt spray test and consequently, test duration will differ from one type of coating to another.
Design Standards:ISO 9227,GB/T 2423.17-1993 ,GB/T 2423.18-2000,GB/T 10125-1997,ASTM.B117-97
JIS H8502 ,IEC68-2-11,IEC68-2-52 1996 ,GB.10587-89,CNS.4158,CNS.4159,CASS,GB/T 12967.3-91 CASS
LR-B007 Touched Screen Salt Spray Tester(120type)
Inner size:
| Inner size | 1200×1000×500(L×W×H)mm |
| Outside size | 1900×1300×1400(L×W×H)mm |
| Test room temperature | NSS ACSS 35℃±1℃/ CASS 50℃±1℃ |
| Pressure Barrel Temperature | NSS ACSS 47℃±1℃/ CASS 63℃±1℃ |
| Laboratory capacity | 600L |
| Volume of salt water tank | 40L |
| Compressed air pressure | 1.00±0.01kgf/cm2 |
| Volume of spray | 1.0-2.0ml/80cm2.h |
| Laboratory relative humidity | 85%RH above |
LR-B007 Touched Screen Salt Spray Tester(120type)
Technical base:
| A. | Salt spray test：NSS，ACSS | ||
| 1. | Test room： | 35℃ ± 1℃ Fluctuation：≤±0.5℃ uniformity: ≤2℃ | |
| 2. | Saturated air barrel temperature： | 47℃ ± 1℃ | |
| B. | Corrosion resistance test：CASS | ||
| 1. | test room： | 50℃±1℃ fluctuation：≤±0.5℃ uniformity: ≤2℃ | |
| 2. | Saturated air barrel temperature： | 63℃ ± 1℃ | |
所有評論僅代表網友意見，與本站立場無關。