安訊士球機怎么重置IP地址恢復默認設置-AXIS Q6055-E PTZ 球機
把電源保護開關(4)按鈕按住，然后再按住控制(7)按鈕，加電啟動，直到球機自檢.
重置到工廠默認設置
這將重置所有參數，包括IP地址，到工廠默認設置：
1。按下并按住控制按鈕和電源按鈕大約15秒，直到狀態指示器閃爍琥珀色（參見如下圖）
2。釋放控制按鈕，但繼續按住電源按鈕大約1分鐘，直到狀態指示器。變成綠色。
3。釋放電源按鈕并重新組裝產品。
4。該過程現已完成，產品已重置為出廠默認設置。默認IP地址為：192.1680.90
安訊士球機如何恢復出廠設置-AXIS Q6055-E PTZ 球機
Reset to Factory Default Settings
This will reset all parameters, including the IP address, to the factory default settings:
1. Press and hold the Control button and the Power button for about 15 seconds until the Status indicator flashes amber (see
as below picture)
2. Release the Control button but continue to hold down the Power button for about 1 minute until the Status indicator
turns green.
3. Release the Power button and re-assemble the product.
4. The process is now complete, the product has been reset to the factory default settings. The default IP address is
192.168.0.90
網站客服
