昇降搖擺型分割器
70DH
左右搖擺、上下夾取系統緊密及高精度、高速度之夾取輸送，為您自動化系統提供了多變化流程功能。 H系列為出力軸上下往復運動兼間歇旋轉或左右搖擺運動之合成機構。
70DH
外型線圖
規格
項目 符號 單位 數值 出力軸容許徑向負荷 C1 kgf 7 出力軸容許軸向負荷 C2 kgf 14 出力軸容許力矩 Ts kgf-m 參考力矩表 入力軸容許徑向負荷 C3 kgf 100 入力軸彎曲力矩 C4 kgf 95 入力軸扭矩 C5 kgf-m 6 入力軸的GD2 (註1) C6 kgf-m2 x 10-2 定位分割精度 sec. ±30 重量 kg 22
入力軸的GD2是在停留範圍內的數值。 C1~C5數值是達到安全係數=2時的數值。 *本公司保有圖面修改之權利，詳細規格請與本公司聯絡。
| 項目 | 符號 | 單位 | 數值 |
|---|---|---|---|
| 出力軸容許徑向負荷 | C1 | kgf | 7 |
| 出力軸容許軸向負荷 | C2 | kgf | 14 |
| 出力軸容許力矩 | Ts | kgf-m | 參考力矩表 |
| 入力軸容許徑向負荷 | C3 | kgf | 100 |
| 入力軸彎曲力矩 | C4 | kgf | 95 |
| 入力軸扭矩 | C5 | kgf-m | 6 |
| 入力軸的GD2 (註1) | C6 | kgf-m2 | x 10-2 |
| 定位分割精度 | sec. | ±30 | |
| 重量 | kg | 22 |
*本公司保有圖面修改之權利，詳細規格請與本公司聯絡。
Sway Model
70DH
The oscillating, up and down gripping system contributes to close tight, high precision, and high-speed grasp convey, which in automation system provides a variety of multi-process capabilities. The H series designed as the synthesis mechanism for output shaft offers reciprocating motion, intermittent rotation, or rocking movement.
70DH
Dimensions
Specification
Item Sym-bol Unit Value Allowable thrust load on output shaft C1 kgf 7 Allowable radial load on output shaft C2 kgf 14 Allowable torque on output shaft Ts kgf-m Refer torque table Allowable thrust load on input shaft C3 kgf 100 Max. repetitive bending force on input shaft C4 kgf 95 Max. repetitive torque on input shaft C5 kgf-m 6 GD2 of input shaft (Note1) C6 kgf-m2 x 10-2 Indexing accuracy sec. ±30 Weight kg 22
GD2 of input shaft is a value in dwell range. Value of C1 to C5 are those obtained for safety factor=2. *The company reserves the right to modify the drawings, detailed specifications, please contact us.
| Item | Sym-bol | Unit | Value |
|---|---|---|---|
| Allowable thrust load on output shaft | C1 | kgf | 7 |
| Allowable radial load on output shaft | C2 | kgf | 14 |
| Allowable torque on output shaft | Ts | kgf-m | Refer torque table |
| Allowable thrust load on input shaft | C3 | kgf | 100 |
| Max. repetitive bending force on input shaft | C4 | kgf | 95 |
| Max. repetitive torque on input shaft | C5 | kgf-m | 6 |
| GD2 of input shaft (Note1) | C6 | kgf-m2 | x 10-2 |
| Indexing accuracy | sec. | ±30 | |
| Weight | kg | 22 |
*The company reserves the right to modify the drawings, detailed specifications, please contact us.
所有評論僅代表網友意見，與本站立場無關。