PSU12.5-120，1500W可編程開關直流電源，0-12.5V,0-120A
PSU20-76，1520W可編程開關直流電源，0-20V,0-76A
PSU40-38，1520W可編程開關直流電源，0-40V,0-38A
PSU60-25，1500W可編程開關直流電源，0-60V,0-25A
PSU6-200，1200W可編程開關直流電源，0-6V,0-200A
額定電壓：6V/12.5V/20V/40V/60V
輸出額定功率：1200W~1520W
C.V/C.C優先；尤其適合電池和LED產業
可調斜率
串行和并行操作(*大串2臺/并4臺)
高效率和高功率密度
19''機架尺寸設計
標配接口：LAN、RS-232 & RS-485、USB(Device/Host)、模擬控制接口
選配接口：GPIB/模擬控制接口(獨立電壓控制)/模擬控制接口(獨立電流控制)
PSU系列可編程單組輸出開關直流電源供應器，提供了定電壓或定電流優先權(C.V / C.C Priority)、斜率優先權設定(adjustable CV/CC Slew Rate)及串并聯等功能。PSU-系列直流電源供應器的高功率密度設計能在1U的尺寸中提供1520W的輸出功率，加上由背板輸出和各種通訊控制接口，使得PSU-Series非常適合于LED模組、車用部品(小型直流無刷馬達)、DC/DC Converter及混合動力用電池模組的生產測試。
PSU-Series可編程單組輸出開關直流電源供應器，全系列包含五個機種，電壓及電流涵蓋從6V/200A 到 60V/25A，其單機的輸出功率從1200W至1520W，為了滿足更多用戶高功率輸出的需求如：直流無刷馬達及混合動力用的電池模組，PSU-Series 搭配同型號的單機進行Master / Slave的控制，可提供2組串聯操作模式或4組并聯操作模式，因此本系列機種在串聯后的*高電壓輸出范圍可達120V，在并聯后的*大電流輸出范圍可達800A。
PSU-Series可編程單組輸出開關直流電源供應器的設計是用來滿足當今在電源半導體元件或是電源行業所使用之零件在高速應用下對V-I 特性曲線測試的需求，如DC-DC Converter、混合動力電池模組和汽車零部件等，在半導體電路設計、電源模組設計及產品檢測都需要使用快速斜率控制的電源供應器來驗證其特性，因此，PSU-Series可編程單組輸出開關直流電源供應器，其內建可調電壓及電流之上升或下降斜率，用戶可按產品個別的特性進行定電壓(CV) 或(CC)定電流(上升及下降)斜率參數的設定，以確保產品驗證之周延。由于綠能產品的興起及日漸普級化，LED組合而成的產品應用非常廣泛，因應LED產品其電源導通瞬間所產生的突波，PSU系列電源供應器的CC優先模式可以讓用戶在測試時將電源供應器設定在強制定電流之下動作，以抑制突波的產生。
| Output | |||||||
| Model |
| PSU | 6-200 | 12.5-120 | 20-76 | 40-38 | 60-25 |
| Rated Output Voltage (*1) |
| V | 6 | 12.5 | 20 | 40 | 60 |
| Rated Output Current (*2) |
| A | 200 | 120 | 76 | 38 | 25 |
| Rated Output Power |
| W | 1200 | 1500 | 1520 | 1520 | 1500 |
| Constant Voltage Mode | |||||||
| Model |
| PSU | 6-200 | 12.5-120 | 20-76 | 40-38 | 60-25 |
| Line regulation (*3) |
| mV | 2.6 | 3.25 | 4 | 6 | 8 |
| Load regulation (*4) |
| mV | 2.6 | 3.25 | 4 | 6 | 8 |
| Ripple and noise (*5) | p-p (*6) | mV | 60 | 60 | 60 | 60 | 60 |
|
| r.m.s. (*7) | mV | 8 | 8 | 8 | 8 | 8 |
| Temperature coefficient |
| ppm/ °C | 100ppm/°C of rated output voltage, after a 30 minute warm-up. | ||||
| Remote sense compensation voltage (single wire) |
| V | 1 | 1 | 1 | 2 | 3 |
| Rise time (*8) | Rated load | ms | 80 | 80 | 80 | 80 | 80 |
|
| No load | ms | 80 | 80 | 80 | 80 | 80 |
| Fall time (*9) | Rated load | ms | 10 | 50 | 50 | 80 | 80 |
|
| No load | ms | 500 | 700 | 800 | 1000 | 1100 |
| Transient response time (*10) |
| ms | 1.5 | 1 | 1 | 1 | 1 |
| Constant Current Mode | |||||||
| Model |
| PSU | 6-200 | 12.5-120 | 20-76 | 40-38 | 60-25 |
| Line regulation (*3) |
| mA | 22 | 14 | 9.6 | 5.8 | 4.5 |
| Load regulation (*11) |
| mA | 45 | 29 | 20.2 | 12.6 | 10 |
| Ripple and noise (*12) | r.m.s. | mA | 400 | 240 | 152 | 95 | 75 |
| Temperature coefficient |
| ppm/ °C | 100ppm/°C of rated output voltage, after a 30 minute warm-up. | ||||
| Protection Function | |||||||
| Model |
| PSU | 6-200 | 12.5-120 | 20-76 | 40-38 | 60-25 |
| Over voltage protection (OVP) | Setting range | V | 0.6-6.6 | 1.25-13.75 | 2月22日 | 4-44 | 5-66 |
|
| Setting accuracy | V | 0.06 | 0.125 | 0.2 | 0.4 | 0.6 |
| Over current protection (OCP) | Setting range | A | 5-220 | 5-132 | 5-83.6 | 3.8-41.8 | 2.5-27.5 |
|
| Setting accuracy | A | 4 | 2.4 | 1.52 | 0.76 | 0.5 |
| Under voltage limit (UVL) | Setting range |
| 0-6.3 | 0-13.12 | 0-21 | 0-42 | 0-63 |
| Over temperature protection (OHP) | Operation |
| Turn the output off. | ||||
| Incorrect sensing connection protection (SENSE) | Operation |
| Turn the output off. | ||||
| Low AC input protection (AC-FAIL) | Operation |
| Turn the output off. | ||||
| Shutdown (SD) | Operation |
| Turn the output off. | ||||
| Power limit (POWER LIMIT) | Operation |
| Over power limit. | ||||
|
| Value (fixed) |
| Approx. 105% of rated output power | ||||
| Analog Programming and Monitoring | |||||||
| Model |
| PSU | 6-200 | 12.5-120 | 20-76 | 40-38 | 60-25 |
| External voltage control output voltage |
|
| Turn the output off. | ||||
| External voltage control output current |
|
| Turn the output off. | ||||
| External resistor control output voltage |
|
| Turn the output off. | ||||
| External resistor control output current |
|
| Turn the output off. | ||||
| Output voltage monitor |
|
| Turn the output off. | ||||
| Output current monitor |
|
| Turn the output off. | ||||
| Shutdown control |
|
| Turns the output off with a LOW (0V to 0.5V) or short-circuit. | ||||
| Output on/off control |
|
| Possible logic selections: | ||||
| Turn the output on using a LOW (0V to 0.5V) or short-circuit, turn the output off using a HIGH (4.5V to 5V) or open-circuit | |||||||
| Turn the output on using a HIGH (4.5V to 5V) or open-circuit, turn the output off using a LOW (0V to 0.5V) or short-circuit. | |||||||
| Alarm clear control |
|
| Clear alarms with a LOW (0V to 0.5V) or short-circuit. | ||||
| CV/CC/ALM/PWR ON/OUT ON indicator |
|
| Photocoupler open collector output; Maximum voltage 30V, maximum sink current 8mA. | ||||
| Trigger out |
|
| Maximum low level output = 0.8V; minimum high level output = 2V; Maximum source current = 8mA. | ||||
| Trigger in |
|
| Maximum low level input voltage = 0.8V; minimum high level input votage = 2.0V, Maximum sink current = 8mA. | ||||
| Front Panel | |||||||
| Model |
| PSU | 6-200 | 12.5-120 | 20-76 | 40-38 | 60-25 |
| Display, 4 digits |
|
|
|
|
|
|
|
| Voltage accuracy | 0.1% + | mV | 12 | 25 | 40 | 80 | 120 |
| Current accuracy | 0.2% + | mA | 600 | 360 | 228 | 114 | 75 |
| Indications |
|
| GREEN LED's: CV, CC, V, A, VSR, ISR, DLY, RMT, LAN, M1, M2, M3, RUN, Output ON | ||||
| RED LED's: ALM, ERR | |||||||
| Buttons |
|
| Lock/Local(Unlock), PROT(ALM_CLR), Function(M1), Test(M2), Set(M3), Shift, Output | ||||
| Knobs |
|
| Voltage, Current | ||||
| USB port |
|
| Type A USB connector | ||||
| Programming and Measurement (RS-232/485, USB, LAN, GPIB) | |||||||
| Model |
| PSU | 6-200 | 12.5-120 | 20-76 | 40-38 | 60-25 |
| Output voltage programming accuracy | 0.05% + | mV | 3 | 6.25 | 10 | 20 | 30 |
| Output current programming accuracy | 0.2% + | mA | 200 | 120 | 76 | 38 | 25 |
| Output voltage programming resolution |
| mV | 0.2 | 0.4 | 0.7 | 1.3 | 2 |
| Output current programming resolution |
| mA | 6 | 4 | 2.5 | 1.2 | 0.8 |
| Output voltage measurement accuracy | 0.1% + | mV | 6 | 12.5 | 20 | 40 | 60 |
| Output current measurement accuracy | 0.2% + | mA | 400 | 240 | 152 | 76 | 50 |
| Output voltage measurement resolution |
| mV | 0.2 | 0.4 | 0.7 | 1.3 | 2 |
| Output current measurement resolution |
| mA | 6 | 4 | 2.5 | 1.2 | 0.8 |
| Input Characteristics | |||||||
| Model |
| PSU | 6-200 | 12.5-120 | 20-76 | 40-38 | 60-25 |
| Norminal input rating |
|
| 100Vac to 240Vac, 50Hz to 60Hz, single phase | ||||
| Input voltage range |
|
| 85Vac ~ 265Vac | ||||
| Input frequency range |
|
| 47Hz ~ 63Hz | ||||
| Maximum input current | 100Vac | A | 21 | ||||
|
| 200Vac | A | 11 | ||||
| Inrush current |
|
| Less than 50A. | ||||
| Maximum input power |
| VA | 2000 | ||||
| Power factor | 100Vac |
| 0.99 | ||||
|
| 200Vac |
| 0.98 | ||||
| Efficiency (*13) | 100Vac |
| 77 | 82 | 83 | 84 | 84 |
|
| 200Vac |
| 79 | 85 | 86 | 87 | 87 |
| Hold-up time |
|
| 20ms or greater | ||||
| Interface Capabilities | |||||||
| Model |
| PSU | 6-200 | 12.5-120 | 20-76 | 40-38 | 60-25 |
| USB |
|
| TypeA: Host, TypeB: Slave, Speed: 1.1/2.0, USB Class: CDC(Communications Device Class) | ||||
| LAN |
|
| MAC Address, DNS IP Address, User Password, Gateway IP Address, Instrument IP Address, Subnet Mask | ||||
| GPIB |
|
| SCPI - 1993, IEEE 488.2 compliant interface | ||||
| RS-232/RS-485 |
|
| Complies with EIA232D / EIA485 Specifications | ||||
| Environment Conditions | |||||||
| Model |
| PSU | 6-200 | 12.5-120 | 20-76 | 40-38 | 60-25 |
| Operaing temperature |
|
| 0?C to 50?C | ||||
| Storage temperature |
|
| -25?C to 70?C | ||||
| Operating humidity |
|
| 20% to 85% RH; No condensation | ||||
| Storage humidity |
|
| 90% RH or less; No condensation | ||||
| Altitude |
|
| Maximum 2000m | ||||
| Environment Conditions | |||||||
| Model |
| PSU | 6-200 | 12.5-120 | 20-76 | 40-38 | 60-25 |
| Weight | main unit only | kg | Less than 8.7kg | ||||
| Dimensions | (W×H×D) | mm3 | 423×43.6×447.2 | ||||
| Cooling |
|
| Forced air cooling by internal fan. | ||||
| EMC |
|
| Complies with the European EMC directive 2004 /108/EC for Class A test and measurement products. | ||||
| Safety |
|
| Complies with the European Low Voltage Directive 2006 /95/EC and carries the CE-marking. | ||||
| Withstａnd voltage |
|
| AC to Chassis: 1500Vac/1min | ||||
| AC to Output terminal: 3000Vac/1min | |||||||
| Output terminal to Chassis: 1000Vdc/1min | |||||||
| Insulation resistance |
|
| Chassis and output terminal; chassis and AC input; AC input and output terminal: 100MΩ or more (DC 500V) | ||||
所有評論僅代表網友意見，與本站立場無關。