塑料磨片機XL-8015UL電線磨平機 標準啞鈴試片厚度打磨機
塑料磨片機即啞鈴試片磨平機,用于電線外被制作啞鈴試片時,磨平表面的纖維或不規格之處,磨出表面光滑,厚薄均勻的片狀,以供制作啞鈴試片測試其拉力,老化,耐油等試驗之用。
塑料磨片機操作時機臺左右、上下及前后可移動,配有扳手操作。此磨平機根據UL1581相關標準設計及制造。

符合UL1581標準第420.6條規定。
Buffing machine (AUGUST 2, 2006 - UL 1581)
420.6 A power-driven buffing machine (grinding wheel) is appropriate for buffing irregularities from the ples from which die-cut specimens are to be prepared. The abrasive wheel is to be of about No. 36 grit (particle size of 0.019 inch or 0.486 mm). The wheel is to run true and is not to vibrate.
主要技術參數
砂 輪:36 ? 5″
砂輪線速度:3000~5000feet/min或15~25m/s
皮帶輪加速比:2:1
體 積:50×60×40cm
重 量:50kg
電 源:1∮,AC220V 50Hz

















所有評論僅代表網友意見,與本站立場無關。