宏旭 混凝土拱形截水骨架鋼模具 拱形截水骨架鋼模具
混凝土拱形截水骨架鋼模具 拱形截水骨架鋼模具是近幾年來高速護坡使用的新型產品，它的造型為半圓拱形，類似于麥當勞的金拱門樣子。這樣的設計原理是利用兩邊支架進行受力，上方半圓進行擋土。這樣的話可以有效的防止高速公路兩旁的坡體水土流失從而造成危害高速公路的局面，混凝土拱形截水骨架鋼模具 拱形截水骨架鋼模具還有一個優點就是它的骨架當中有一個流水槽可以排水，保證土質的堅固性、非泥濘性。 因為這類鋼模具的體型比較大，所以廠商生產出來的模具都是拼裝式的，這樣是為了方便操作。一套拱形骨架鋼模具包括：主拱、副拱、流水槽和拼裝用的小鋼具，一套標準的拱形骨架鋼模具的直徑在3米，深度達50厘米，使用3毫米主板加工而成，重量在350KG。
To install the steel mould for the protective wall, first of all, we need to know what the design structure of the mould for the anti-collision guardrail looks like, so that we can understａnd how to install it correctly. Most of the moulds for the anti-collision guardrail are supported by thick iron plate welding, and the selection of the iron plate is also very important. Generally, the high-quality Q235 plate with strength and steel coexists, which has good plasticity Shape features, but also very wear-resistant. During processing, it is necessary to directly punch the cut steel plate material into the design shape on the drawing, and then weld the corresponding support rib plate according to the required reinforcement position, so as to protect and resist deformation. During actual installation, it is necessary to check whether the pavement foundation has been roughened, which helps to improve the larger contact surface, Through this pouring out of the wall is more solid. The bottom pavement is perforated to install expansion bolts to fix the molds on both sides of the wall panel. The positioning and effective support by the screw can meet the normal construction use. Protective wall steel mold cement protective wall steel mold highway protective wall mold
所有評論僅代表網友意見，與本站立場無關。